Survey Says: “UHF RFID works”


Share

To give you an idea of where I’m going to take this, let me ask a few simple questions. Would you buy a mattress without laying down on it to see if it’s comfortable? What about a motor cycle or car? Would you buy one without a test drive? In that same vain, would you want your company to invest in UHF(ultra-high frequency) RFID (radio frequency identification) equipment for a RFID project without anything more than specs if you didn’t have to? I would assume the answers are: “of course not”.
Continue reading

Choosing RFID For Industrial Applications; Part 5


Share

In the first four parts of this blog series, I provided an introduction to the 3 most common frequencies/systems used in industrial RFID, detailing Low Frequency, High Frequency and Ultra High Frequency based systems. In this fifth and final post, I will provide some application guidance and criteria to consider when choosing your next Industrial RFID system.

Continue reading

Choosing RFID For Industrial Applications; Part 4


Share/Bookmark

In the first three parts of this blog series, I provided an introduction to the 3 most common frequencies/systems used in industrial RFID, then detailing Low Frequency (LF) and High Frequency (HF) based systems. In this post, I will provide more details specifically on UHF or Ultra High Frequency based RFID.

Continue reading

Choosing RFID For Industrial Applications; Part 3


Share/Bookmark

In part one and two of this blog series, I provided an introduction to the 3 most common frequencies/systems used in industrial RFID and detailed Low Frequency (LF) based systems. In this post, I will provide more details specifically about HF or High Frequency based RFID.

Continue reading

Choosing RFID For Industrial Applications; Part 2


Share/Bookmark

In part one of this blog series, I provided an introduction to the 3 most common frequencies/systems used in industrial RFID. In this post, I will provide more details specifically about LF or Low Frequency based RFID.

Continue reading

Choosing RFID For Industrial Applications; Part 1


Share/Bookmark

Often times those of us in the RFID industry are so close to it that we forget that there are those just being introduced to it and want to just learn about the basics. And I am then reminded that it is our responsibility to help educate people not just on the high level conceptual use, but also continue to touch upon the technology itself. So I will dedicate the next blog posts to a 5 part series explaining the basics about RFID and just as important, what you should think about when considering RFID and discussing where the technology can be used. In this first post, I will introduced the most common frequency based technology used for industrial based RFID as well as begin to define the difference between them.

Continue reading